Inkbit 3D Printing Key Advantages
Smart Vision
Layers optically verified
Every layer is verified and corrected in real time, so parts come out consistent and true to spec across the build and across runs.
0.02 - 0.04 mm
Layer resolution 20 - 40 μm
Inkbit Vista industrial 3D printers come equipped with real-time vision correction system ran by AI.
One Build
Soft + rigid or tunable dielectric
Soft, rigid, and dielectric in a single build, without tooling, secondary assembly, or glue lines.
Zero Tooling
Prototype to high-volume
Combine multiple component files, into a single monolithic build, with freedom to design complex geometric functionality.
Advanced digital factory for rapid production of functional end-use parts.
Most additive systems deposit material and hope.
Vision-Controlled Jetting jets each layer, scans the real topography with structured light, corrects the next pass, then cures under UV. Roughly 63 million droplets land per layer, and the part is checked against your CAD intent the entire way up.
Repeatable parts in materials engineered for the job, not just for the printer.
Rigid, Soft, and Dielectric Material Options
TEPU 30A Elastomer
Exceptional Flexibility & Tempature Range
Production-grade elastomers for parts that demand flexibility, resilience, and repeatable mechanical behavior. TEPU prints seals, gaskets, bellows, living hinges, and compliant interfaces without molding.
Titan Tough Epoxy 85
Rigid Epoxy /// Structural Builds
High-performance structural resin for parts where strength, stiffness, and environmental durability are non-negotiable. Titan Tough 85 is the general-purpose default for functional hardware.
TEPU 50A Elastomer
Chemical & Environmental Resistance
TEPU 50A adds validated UV stability and chemical resistance, retaining roughly 90 percent of baseline elongation after 1,000 hours of UV aging, with low weight gain across oils, water, and common solvents.
Titan Chem Epoxy
Chemical Resistant - Structural Builds
Titan Chem passed ISO 10993-5 cytotoxicity testing and shows minimal swelling across motor oil, sulfuric acid, NaOH, hexane, and isopropyl alcohol, supporting fluid-handling manifolds, fixtures, and electronics enclosures.
Cyclic Olefin Thermoset
Tunable Low-Loss Dielectric
An intrinsically low-loss dielectric for radio frequency, microwave, and millimeter-wave applications where signal integrity is critical. COT enables additive manufacturing of RF components that traditionally require complex machining or multi-step fabrication, and it tunes effective permittivity through lattice geometry.
Part capabilities
at a glance.
General guidance before secondary finishing or post-processing. Final tolerances and envelope depend on the material and geometry, so confirm specifics with applications engineering.
Process
Vision-Controlled Jetting (VCJ), closed-loop optical correction
Layer resolution
20 to 40 microns
Support
Meltable wax, hands-free removal, no sanding required
Multi-material
Yes, soft and rigid combined in a single build
Materials
TEPU elastomers, Titan Tough Epoxy, COT dielectric, custom chemistry
Build envelope
450 mm x 237 mm x 200 mm /// 17.7 in. x 9.3 in. x 7.9 in